Hot take: most voiceover casting problems start before a single audition comes in.
If you’re doing voiceover casting for commercials, two things set you up: your talent specifications, meaning the type of actor you want and the read you’re after, and the details, meaning the rate, the usage, the product category, and where the actor is going to record. Get those right and talent agents can actually work with what you posted.
On Select Casting, every project, union or non-union, goes through talent agencies. That’s how buyers get the most quality auditions.
Voiceover casting for commercials starts with clear talent specifications
Don’t just describe the voice. Describe the read.
“Male, 30s” tells an actor almost nothing. “Warm, a little dry, like he’s letting you in on a secret” tells them everything.
A concise talent specification usually covers gender or gender identity, the age range the voice should represent, the vocal texture (deep, gruff, bright), and the style of the read: accent, energy, emotion. You don’t need a novel. You do need more than “40s, woman.”
And include the actual script, or a short sides section. Actors can’t nail a tone they’ve never seen on the page.
If you have a voice reference, an MP3 or a YouTube link, include it. For a voice match, it’s essential. Even when you’re not matching a specific voice, a reference helps talent agents make sure every submitted audition actually fits what you asked for.
Then, in the details, put the rate, usage, and product or service category right next to each other, and be clear about the studio.
Post a clear rate and usage
The fastest way to get fewer auditions on a voiceover casting? Leave the rate and usage vague.
The rate and usage matter and have a massive impact on participation. If your rate isn’t competitive for the usage, many talent agents won’t submit, or they’ll submit less experienced, newer talent. That’s not them being difficult. They know what going rates are and are protecting their talent.
And it’s very important to be specific about what that rate covers. Is it one :60 and a :15 and :06 cutdown? Say so, and double-check that’s the case. If you get into a session and have the actor read more, the agreed-upon talent fee goes out the window. Expect a new negotiation with the talent agent.
If you’re casting a union job, this is pretty straightforward: write “scale” under rate, put in the usage and exclusivity details, and you’re set. For a non-union job, be more granular. If you just write “$1,000,” you’re going to get emails from talent agents asking what that covers.
A clear non-union rate structure is session fee + buyout terms + talent agent fee. For example: $500 session fee + $1,000 for a 3-month buyout + 20% talent agent fee. If you follow that formula, and the rate is fair, you shouldn’t hear much back-and-forth.
I wrote more about buyout terms.
Non-union agents expect 20% on top of the rate. Union is standard 10%. We have a post on union vs. non-union voiceover talent.
Clear rate, clear usage, clear scope. That’s how you get the best auditions and no end of session headaches.
Something a lot of producers don’t know about Select Casting: if you’re not sure what rate to post, we’ll talk to the talent agents for you. A producer has a budget and a usage plan, but isn’t sure the number will bring in good submissions. So we reach out to agents on their behalf and talk it through before the casting goes out. The first thing agents usually ask about is the product or service category. They want to know the conflict area right away.
The analogy I use is getting triple bidding on a remodel. If you get a high and a low, you know somewhere in the middle is fine. Sometimes you’ll get consensus where it’s clear what the rate should be.
Generally, if you don’t get the number of auditions you were expecting, the rate was too low.
What if you just don’t have the budget? You can still post. I recommend choosing all talent agencies. Often talent agents will submit their newer actors who are toward the start of their careers.
Include the product or service category
The most overlooked detail on a voiceover casting? The product or service category.
Even I used to think of it as a throwaway detail. But whenever I reach out to talent agents on a client’s behalf to talk about an appropriate rate, it’s one of the first things they ask me.
That’s because the category tells them the conflict area, meaning which of the brand’s competitors are in the same space. Agents need that to know which of their actors can actually submit on your spot.
It also affects your budget. A large conflict area, with a lot of competitors advertising, like cellular, can drive up the talent rate. Even if there’s no exclusivity in the contract, an actor who’s on your spot can get passed over for other spots in the same category. They can essentially be excluded without there being exclusivity. Agents know that, and they price it in to protect their talent.
Leave the category off and you’re asking agents to guess. You can end up with fewer auditions, or a conflict that surfaces after you’ve already fallen for a read. So put it right next to your rate and usage. Wireless carrier. Fast food. Auto insurance. One line saves a lot of back and forth.
Home studio vs. a recording session
Where is the actor going to record? It’s worth answering that in your casting details, but it’s more than “home studio required.”
As a general practice, requiring a home studio won’t limit your submissions. COVID made it standard practice. But it could, and it mostly depends on who you’re casting, not age range alone. If the VO actor is young or just got into the business, the odds are low they have the resources to build a nice home studio. Or that they have a quiet space to record. I’m guessing it’s pretty low, because they’re just getting started.
If that’s who you’re casting, there are a few options: 1) just cast in your market. They can come into your favorite mix studio. 2) set aside budget for a remote studio. 3) have the actor pay for the remote setup.
I offer 3 because it happens (Studio Awesome has an actor rate for this situation, as do most post houses), but honestly: it’s a pretty bad look when an actor is getting paid a $500 session fee and has to turn around and pay the studio $150 per hour, especially if it’s a big client. Budgets aren’t what they used to be, we all feel it, but penalizing the actor when they were chosen for their voice and performance has always felt unfair.
So make sure you clarify the talent’s recording options and requirements in the breakdown. That way there are no surprises for you or the talent. If you’re willing to pay for a remote studio, say so. You can also say that talent outside your market who can’t come in to your preferred recording studio need a home studio.
How many talent agencies to invite
Match the number of talent agencies to the role.
If it’s a standard announcer read, you can likely invite your favorite 5 to 10 talent agencies and get plenty of auditions. If you’re asking for something specific or non-native to the US, like French, Portuguese, or a specific accent from one region of Germany (that actually happened), or an ultra-specific role like “man, 80s” where the talent pool is small, invite more talent agencies to make sure you get enough auditions.
If you just don’t have the budget, I recommend choosing all talent agencies.
For a non-union project, invite a few more talent agencies than you think you need, especially if you don’t already have a relationship with them. Most talent agencies represent union and non-union actors, but some are more particular about which non-union projects they’ll participate in. It usually comes down to the rate.
One more thing about the talent pool: SAG-AFTRA actors can’t work on non-union projects. Non-union actors can be hired on a union job through a Taft-Hartley, which is one of the ways an actor becomes eligible to join the union. If you have the budget and want the widest options, casting union lets you audition both. I wrote more about hiring a non-union actor for a union job.
Limit submissions per role
Don’t rush the casting sheet, even if you need auditions quickly. Think about the end result: how many total auditions do you actually want to listen to, and how do you want them organized?
This is the big one. Unless you’ve only invited a handful of talent agencies, say how many auditions each talent agency should upload per role. If you don’t, you can get inundated. We’ve seen projects with over a thousand auditions per role.
That’s hard on you, and it isn’t fair to the talent agents and actors who participated, because the vast majority of those auditions will go unheard.
Be particular. If you want about a hundred auditions for an announcer role and you’ve invited ten talent agencies, limit submissions per role to ten. If you invite every talent agency, make it three. You’ll still get plenty of strong options, and you’ll force each talent agent to really think about who they put in front of you. It’s a better use of everyone’s time.
When you set up the project, enter the role names from the script, even if it’s just an announcer. Talent agencies have to format their auditions to those role names. That keeps the naming consistent and makes the playlist much easier to sort and share with your team.
Review the auditions
Getting a lot of auditions looks like success. But a few hundred auditions isn’t a win. It’s homework. 100 auditions are only valuable if they’re quality auditions. If only 10 of them are good, you really only got a tenth of what you thought you got.
Actual success is curated auditions from real actors who hit your talent specifications. That’s why every Select Casting project goes through talent agencies. Agents submit actors they know are right for the role and can deliver in the actual session. I wrote more about why every project on Select Casting goes through talent agencies.
Listen in context. A voice that sounds great alone can disappear under picture and music. Play your shortlist against the cut. The goal was never the biggest playlist. It’s the right shortlist, faster.
A few questions I get a lot
What if I’m not sure what rate to post?
Don’t guess. Ask us. We’ll talk to the talent agents for you before the casting goes out.
What if I just don’t have the budget?
You can still post. I recommend choosing all talent agencies. Often talent agents will submit their newer actors who are toward the start of their careers.
Why does every project on Select Casting go through talent agencies?
Because that’s how you get the most quality auditions. Talent agents know their actors’ range and stake their reputation on every submission. Represented talent can deliver the same performance in the actual recording session. That’s where it counts.